Mask Filtration and Breathability Data

Last Updated: 2/12/2021

We’ve tested the most common masks that we could find. This is how they stack up.

Test Method

The problem with mask testing is that most testing standards have a lot of variability.

Getting in touch with the main mask testing labs during the pandemic has been a struggle. This has caused a bunch of research institutions and DIYers alike to create their own test setups. This is a problem because these different test set-ups produce results that cannot be compared side by side. A good score in a non-representative test doesn’t mean anything.

As such, Fix The Mask has chosen the most widely accepted, aggressive test method there is, the NIOSH protocol through which N95 respirators are validated.

Which metrics matter?

There are 3 criteria that matter most: Filtration, Breathability, and Fit. All three are critical to ensuring optimal mask performance. If one of these 3 is inadequate, the resultant mask is poor. We have independently validated fit with the Essential Mask Brace, and data can be found here. We have you covered.

Filtration and Breathability will be guided by the filter that you choose. We’ve tested and reported the data for some commonly available masks, shown below.

Filtration Efficiency

The ideal is to have as high a filtration efficiency as possible. N95 respirators perform between 95% — 100%.

In our tests, surgical masks (made of melt blown fabric) perform way better than any cloth mask. Why? Check out our blog post here.

Breathability

This is measured by “initial resistance” in the test set-up. Anything above 135Pa is very difficult to breathe through when properly sealed, and it is not recommended wearing for a long period of time.

DISCLAIMER: Third-party links from FTM Corporation may direct you to third-party websites that are not affiliated with us. We are not responsible for examining or evaluating the content or accuracy and we do not warrant and will not have any liability or responsibility for any third-party materials or websites, or for any other materials, products, or services of third-parties. We are not liable for any harm or damages related to the purchase or use of goods, services, resources, content, or any other transactions made in connection with any third-party websites. Please review carefully the third-party’s policies and practices and make sure you understand them before you engage in any transaction. Complaints, claims, concerns, or questions regarding third-party products should be directed to the third-party.

Consumer-available Masks

Armbrust USA: https://www.armbrustusa.com/collections/medical-face-masks-made-in-austin-tx/products/usa-made-surgical-masks-1?variant=34596435099781

Herogard: discontinued

Zubrex: https://www.amazon.com/ZUBREX-Disposable-Safety-Face-Protection/dp/B088BY7YPX

Safe Warrior: https://www.walgreens.com/store/c/safe-warrior-disposable-face-mask/ID=300401401-product

KiBreez: https://www.acehardware.com/departments/tools/workwear-and-safety-gear/respirators-and-face-masks/2007158

BYD (Costco): discontinued

Outdoor Research: https://www.outdoorresearch.com/us/face-mask-kit-283298

Healthcare-available Masks

DuPont: https://www.fishersci.com/shop/products/sierra-proced-mask-w-earloop/19088879

Crosstex: https://www.henryschein.com/us-en/dental/p/infection-control-products/face-masks/secure-fit-ultra-mask-l3/7740093

Essentials: https://www.henryschein.com/us-en/dental/p/infection-control-products/face-masks/essentials-procedure-mask-l1/1126761

The latest data and information on the Essential Mask Brace and masks in general.